Is SC Mermer a quarry-side Denizli travertine supplier?

Yes. SC Mermer (Süleyman Ceylan Mermer) operates in Kale, Denizli and supplies travertine direct from the source. That allows batch-consistent colour selection (Light, Light Mix, Premium) and project-specific cutting lists for tiles, Roman pattern sets and slabs.

DENİZLİ · TÜRKİYE — NATURAL TRAVERTINE

Travertine, Straight From the Source

Q: What sizes of travertine do you supply?

Our regular stock formats are 20 × 20 cm and 20 × 40 cm tiles at 1.2 cm thickness, plus Roman pattern (French pattern) sets that combine four sizes in one repeating module. Slabs and any other dimension are cut to order — send us your cutting list and we will produce to it.

Q: What is the difference between filled and unfilled travertine?

In filled travertine the natural cavities are filled with resin or cement paste and the surface is ground level, giving a smooth, easy-to-clean finish suited to interiors and bathrooms. In unfilled travertine the cavities are left open, which increases grip underfoot and keeps the natural texture visible — the usual choice for pool surrounds and outdoor paving.

Q: Which finish should I choose for a pool surround?

Tumbled or sandblasted travertine, always unfilled. Both give high slip resistance when wet, and the softened edges of tumbled stone are comfortable underfoot. Polished travertine should never be used around water.

Q: Where are you based and do you ship internationally?

We are based in Kale, Merkezefendi, Denizli (postal code 20180) — the heart of Türkiye's travertine region — and deliver throughout Türkiye. For shipments outside Türkiye, contact us on WhatsApp +90 507 784 46 57 or email info@suleymanceylanmermer.com with destination and quantity so we can arrange logistics and quote.

SC Mermer supplies honed, tumbled and split-face travertine from Denizli — the region that also produced Pamukkale's white terraces. Standard tiles, Roman pattern sets and custom-cut slabs, with the size, thickness, finish and grade stated for every product.

See the Range Request a Quote

15+Years of experience

500+Completed projects

50+Natural stone types

100%Quality assurance

ABOUT US

Why Denizli Travertine

Travertine forms where mineral-rich groundwater reaches the surface and deposits calcium carbonate layer upon layer. Gases escaping during that process leave the small cavities that give travertine its character. The same geology that built the terraces of Pamukkale runs underground across the Denizli basin, which is why this region is one of the richest travertine sources in the world.

Denizli stone is known for a balanced tonal range, regular bedding and the ability to yield large blocks — which means less waste and a more consistent batch. We work in Kale, Merkezefendi, where the quarries are.

Why buying at source matters: travertine is a natural stone, so tonal variation between production batches is normal. Working directly at the quarry lets us reserve enough material from one single batch for your whole project — the difference is most visible on large floors and façades.

RANGE

Products & Specifications

Every item below is described by its actual size, thickness, finish and grade — no vague product names. Quote the code when you contact us.

Sizes not held in stock are cut to order. Send a cutting list and we will produce to it.
Code	Product	Size	Thickness	Finish	Typical use
TRV-L-2040	Classic Travertine — Light	20 × 40 cm	1.2 cm	Honed, filled	Interior floors, bathrooms, cladding
TRV-P-2020	Classic Travertine — Premium	20 × 20 cm	1.2 cm	Tumbled, unfilled	Pool surrounds, terraces, interiors
TRV-LM-2020	Classic Travertine — Light Mix	20 × 20 cm	1.2 cm	Honed, filled	Interior floors and bathroom walls
TRV-PLK	Classic Travertine Slab	Cut to order	To specification	Honed, filled	Large halls, stair treads
TRV-ROMA-H	Roman Pattern Set	4-size module	To specification	Honed, unfilled	Terraces, living areas
TRV-ROMA-E	Roman Pattern Set — Tumbled	4-size module	To specification	Tumbled, unfilled	Pool surrounds, garden paving
TRV-ANTIK	Antique Tumbled Travertine	Roman pattern / mixed	To specification	Tumbled, unfilled	Rustic and restoration projects
TRV-DUVAR	Tumbled Travertine Wall Cladding	Strip / horizontal course	To specification	Tumbled	Feature walls, fireplaces, façades
DT-PATLATMA	Split-Face Natural Stone	Irregular coursing	To specification	Split face	Façades, garden and retaining walls

Grades explained. Light — narrow, even tonal range. Light Mix — tones from the same palette deliberately blended for a livelier floor. Premium — selected, most homogeneous batches. Antique — a deliberately wide range of beige, grey and cinnamon. Grade describes tone and texture consistency, not strength: every grade comes from the same quarry and is equally sound.

SURFACE

Finishes and Where They Belong

The same block becomes a different material depending on how its surface is worked.

The finish does not change the strength of the stone — it changes texture, grip and maintenance.
Finish	Appearance	Grip when wet	Best for
Honed	Matte, smooth, calm	Good	Interior floors, bathroom walls, cladding
Polished	Glossy, deepened tone	Poor — slippery	Dry interiors and walls only
Tumbled	Aged look, softened edges	Very good	Pool surrounds, terraces, gardens
Brushed	Lightly textured, matte	Good	High-traffic and commercial interiors
Split face	Fractured, strong shadow	—	Façades and garden walls
Sandblasted	Even, matte, rough	Very good	Ramps, stairs, safety-critical areas

One rule for pool surrounds: never use polished travertine. Wet and glossy is a genuine safety risk. Choose tumbled or sandblasted, and keep it unfilled — lighter tones also stay cooler in direct sun.

APPLICATIONS

Thickness by Use

Thickness is set by load and installation method, not by looks.

Final thickness depends on the substrate, the installation method and the expected load.
Application	Usual thickness	Suggested finish
Interior walls	1.2 cm	Honed or tumbled
Interior floors	1.2 cm and above	Honed, filled
Bathrooms & wet rooms	1.2 cm	Tumbled floor, honed wall
Terraces & pool surrounds	2 cm and above	Tumbled, unfilled
Driveways & garden paths	3 cm and above	Tumbled or split face
Stair treads	3 cm (risers 2 cm)	Honed, anti-slip grooves optional

Ordering quantity: add a cutting allowance to the area you are paving — usually 5% for straight-laid rectangular areas and 10% for Roman pattern or tumbled work. Ordering short means a second batch, and a second batch rarely matches the first exactly.

FAQ

Frequently Asked Questions

What sizes of travertine do you supply?

Our regular formats are 20 × 20 cm and 20 × 40 cm tiles at 1.2 cm thickness, plus Roman pattern (French pattern) sets combining four sizes in one repeating module. Slabs and any other dimension are cut to order — send your cutting list and we will produce to it.

What is the difference between filled and unfilled travertine?

In filled travertine the natural cavities are filled and the surface ground level, giving a smooth, easy-to-clean finish for interiors and bathrooms. In unfilled travertine the cavities stay open, which increases grip and keeps the natural texture — the usual choice for pool surrounds and outdoor paving.

Which finish should I choose for a pool surround?

Tumbled or sandblasted, always unfilled. Both give high slip resistance when wet, and tumbled edges are comfortable underfoot. Polished travertine should never be used around water.

How should travertine be cleaned?

Travertine is calcium carbonate based, so it reacts with acid. Lemon, vinegar, limescale removers and similar products permanently etch the surface. Use pH-neutral cleaners made for natural stone and warm water. Blot spills rather than wiping them, and re-apply an impregnating sealer every few years.

Where are you based and do you ship internationally?

We are based in Kale, Merkezefendi, Denizli — the heart of Türkiye's travertine region — and deliver throughout Türkiye. For shipments outside Türkiye, contact us with your destination and quantity so we can arrange logistics and quote accordingly.

Can I get samples before ordering?

Yes. Tell us the product code and we will send samples. Please assess them in the light of the actual space — travertine looks noticeably different under daylight and artificial light.